Unboxing ZMR250 Build Kit

Instead of trying to compile my own parts list I ordered a ZMR250 build kit from FPVModel. For my first build I wanted to make sure the components that I used would be compatible so I went with this ARF (almost ready to fly) kit from FPVModel. If you are interested in building this quad here is the Link.

Unbozxing ZMR250 Build kit

ZMR250 Build Kit

As of Nov 11, 2015 this is what comes in the kit I ordered

ZMR250 V2 250MM mini quadcopter frame kit x 1
Dragonfly MC1806 2300KV Brushless Motor x 4 (2cw+2ccw)
FVT Littlebee 20A Mini ESC  x 4
Dragonfly 5030 CW/CCW props x 8 pairs
Naze32 Acro Funfly flight controller x1
SONY Effio-e 4140+811 1/3 CCD 3.6mm Lens 700TVL camera x 1
AOMWAY 5.8g mini 200mw 32CH transmitter x 1
Velcro Battery Strap  x 2
Mini DC-DC 12V Regulator Module x 1
5.8G Gain Mushroom Omni Antenna x 1 (Update on Nov.3rd, 2015)
20CM servo extension cable x 2
3M double sided adhesive tape x1
and silicon wires, straps, shrink tubes, XT60 plug etc that everything showed in the picture.

Zmr250 Build KitZmr250 build kit with FPV camera

I also purchased a MinimOSD which was not included in the kit to get On Screen display. Here is the link to OSD

If something changes in this kit I will make note*

Build coming soon!

Leave a Reply

Your email address will not be published.